|
GPRS MODEM-CONTROLLER GMC-1 The GMC-1 is intended for acquisition and transmission of data, about of controllable object condition, through a cell-communication network to the server. The GMC-1 includes: - the SIM900 system from GPRS module;
- processor;
- signals matching module;
- external GSM-antenna.
|
|
Read more...
|
|
|
ALUMINUM PROFILES - AP01 We are offering aluminum profile of closed-loop type with transverse dimensions: | external | 61,5x28mm | | internal | 55x20mm |
Profile length on the customer’s order.  
Fig.1 Fig.2 |
|
Read more...
|
|
UNIT OF REMOTE TONE CONTROL BY STARTER (RTCS) We are offering two modification of unit RTCS unit: - Unit of RTCS-01, intended for start and control of main aggregates (motors, etc) and test of voltage occurrence on single-phase and three-phase current mains with 380V by the given DTMF code;
- unit of RTCS-02, intended for DTMF control command transmission to RTCS-01 unit and reception from its information about unit situation.
RTCS-01 and RTCS-02 units give the opportunity to build remote control systems with large number of various electric machines and carry out control of units’ situation on various areas. Each of RTCS-01 and RTCS-02 unit operates in a complex with radio station. The radio station can be any type with the opportunity to voice frequency transmission. |
|
Read more...
|
 |
 |
|
UNIT OF REMOTE CONTROL BY STARTER (TCSGPRS01) We are offering the TCSGPRS01 unit intended for communication by GPRS. TCSGPRS01 unit carries out: - start and control of executive assemblies (motors, etc.);
- test of voltage occurrence in single-phase and three-phase mains with 380 V.
Unit gives the opportunity to: - build remote control systems with large number of various electric machines;
- carry out control of units on various areas;
- organize initial data acquisition from various sensors and as digital stream to transfer by GPRS;
- provide dialog with control centre by the given protocol;
- according to received data, transfer Switch ON/OFF command to electric machine starter or request information about starter situation and occurrence of voltage in electric machine's current mains.
Unit control commands are set: by PC, connected to USB input or by keyboard in off-line mode. |
|
|
|
|
PARABOLIC-DISH ANTENNA We are suggesting the parabolic-dish antenna, which transforms wide directional pattern to narrow diagram of paraboloid.
SPECIFICATIONS | Frequency range | 1,5...2,5 GHz | | Bandwidth | 0,05 fcenter | | VSWR | 1,3 | | Input resistance | 50/75 Ohms | | Gain | 15 dB | | Max. power | 5 W | | Dimensions | 30x25x20 cm |
|
|
|
|
|
|
|
Page 1 of 15 |
Products
