Products

News

Vacancies

 

Work conditions:

  • by contract
  • full-time   
Please submit your CV to:

mark@yetri.am

info@yetri.am 

Phone:(+37410)566061 

 

More...



Products
Print E-mail
Products - Products

SOFTWARE "CONTRACT" 

Software "CONTRACT" is intended for the forming, registration and saving of contracts and agreements.

It has order book, giving the full information about: 

  • orders and customers;
  • contractor and departments participating an the works execution;
  • stores of  ready  production, materials and complications;
  • suppliers.

The user can easily enter the detailed information about orders  and receive corresponding information by the friendly interface .

For providing of software functioning  are necessary the following minimal complex of technical means:

* IBM PC compatible computer;
* RAM 8 MB;
* minimum10 Mb free place on HDD;
* OC Windows 95.

Software is accessible for the each user, who can operate by Windows 95.

 

Extra  possibilities:

Limitations (password insertion) to baseline access may be included on program.   

 

 
Print E-mail
Products - Products

TELEPHONE INFORMATION AND REFERENCE SYSTEM (I&R)

The system is intended for organizing information service with N subscribers and M operators of phone lines.
The telephone I&R system operates by phone controllers, corresponding to the Microsoft TAPI standards.

 

The system provides following possibilities: 

  • detecting of the  incoming  call;
  • automatic number identification of subscriber;
  • time filling of subscriber until connection to operator;
  • connection to the free operator;
  • contact the operator - subscriber in case of the free operator;
  • information about the connection (start, end, operator's number) and conversations recording;
  • monthly report about of calls number;
  • archive of the conversations.

 

 
Print E-mail
Products - Products

SELF-ACTING FORMER OF VOICE MESSAGES

It is a hardware-software complex, provided automated preparation and automatic playback of the specialized voice messages ATIS.
The device is interfaced with airdrome radio station or transmitting amplifier for cyclic transfer of the message to  crew of planes. The message is transferred in Russian, English, or in two languages.
While operator prepares the message, he uses only keyboard and display of computer. The message is reproduced    by a voice of the announcer. Therefore the choice of a working place does not require sound insulated room.
The requirements to technical qualification of the operator in a part of "computer" preparation are minimal, time necessary for training the personnel usually makes from tens of minutes up to several hours.

 The device includes:

* IBM PC with  Sound Blaster; 
* interface with   telegraph - telex line; 
* interface with the transmitting amplifier; 
* software;
* the description and operation.
       

On the customer's order

Means of restriction of  unauthorized access to the device (introduction of the passwords, recording of authorship of the messages) can be included  in  system.
The reserve sets of the equipment can be included, printer, and also source of uninterrupted power (UPS) with respec-tive alteration of cost of delivery.

 read more PDF

 

 

 
Print E-mail
Products - Products

VSWR SENSOR (MB1) AND DETECTOR HEAD (DH1) TO THE R2-102 MEASURING DEVICE 

We are offering the VSWR sensor (measuring bridge(MB1)) and detector head (DH1), which are used in a set with measuring units (sweep frequency generator (SFG) and indicator unit (Я2Р-70) of P2-102 device.

Designation  of P2-102 device are:  panoramic displaying on the indicator  and measurement of VSWR frequency characteristics and attenuation of elements of the coaxial tract. It is used in laboratory and enterprises bay at measurement and adjustment of VSWR parameters and attenuation of various microwave devices.

VSWR sensor is a measuring bridge (MB1),which forming signal  proportional to reflection coefficient of the measured device in cross-section of a measuring connector at the expense of comparison of a reflected signal from internal reference loading with a signal, reflected from the measured device. The formed signal of unbalance is detected on the built - in detector and transferred in the measuring block. 
It is 6dB resistance divider formed by three resistors; resistance of each is equal to a wave impendence of a coaxial line (50 Ohm).

  

 

 VSWR sensor (MB1) parameters 

Operating frequency 0,01…2,14 GHz  
VSWR measurement range 1,05 - 14,0  
Tract's size 7/3,04 mm  
Dynamical range 40 dB  

Detector head (DH1) it intended for formation of low-frequency signals proportional to the power level of the microwave signals.
It is used for measurement of the module of transmission coefficient , amplification, attenuation, and for power measurement. Due to using of special designs (with the built - in amplifier with frequency F0=100 kHz) and resent element base the detector head has a bandwidth of frequencies and measured powers, small irregularity amplitude-frequency characteristics, low value of VSWR input.

 
DH1 Parameters
Frequency range 0,01...4 GHz
Measurable power range  minus 20...60 dBm
Limit of effective range of attenuation 0…40dB
Wave impendence  50 Ohm
Input VSWR, no more than  1,2
Tract’s size  7/3,04 mm
 read more PDF
 
 
Print E-mail
Products - Products

AUTOMATED CONTROL SYSTEM BY TECHNOLOGICAL PROCESSES (INDUSTRIAL CONTROL ) 

Automated control system of technological processes (ACS TP) is intended for: automation of data collection about of complex defused   complexes of the process equipment and for management of manufacturing process, maintenance of an optimum operating mode of technological apparatuses and accounting of the intermediate data, formation and output of the accounting and archival documentation, diagnostic of the measuring equipment.

The flexible modular structure of  ACS TP  allows providing for each technological object an optimum level of automation, sufficient for effective and safety carrying out of manufacturing process.
We are offering development and adaptation of the software of  ACS TP  under orders of clients with reference to concrete object and equipment.
The implementation of the given system allows to:

  • automate manufacturing process;
  • provide a remote control and management;
  • improve conditions and increase safety of work.

 On the central computer the opportunity of management by the manufacturing process from a computer and archiving of the data, the printing of reports and other processes are carried out.

The quantity of controller is determined by demands of the manufacturing process. The controller can operates as in composition of a complex under the control of the central computer, and is independent with an opportunity of manual input of parameters.
The software of the controller develops for a concrete manufacturing process.
Controller includes:

  • measuring unit which includes channels of temperature measurement with thermistor sensor such as NTC 10k (up to 24), channels of analogue signals (up to 8) measurement, channel of voltage and a current measurement (on one), electrically untied from the system;
  • control unit by which the control of four clock step motor (one channel), thyristor module (3 phases) and managing keys such as « dry contact » (up to 8) is carried out.
  • processing unit;
  • unit of indication and communication interface with computer.
The information transmission from controller to the computer and reception of control commands is carried out by using of standard RS232 or RS4222 interfaces.

 read more PDF

 

 
« StartPrev12345678910NextEnd »

Page 8 of 15
ISO.jpg

Advertising